Amplify the WiFi community of your router with the repeater FRITZ!Repeater 1200 AX

Repeater Configuration The very first thing we should do is join the Wi-Fi repeater to

Repeater Configuration

The very first thing we should do is join the Wi-Fi repeater to {an electrical} outlet that’s near the router, to hold out the configuration with out protection issues. Later we are able to transfer this WiFi repeater to an intermediate level between the router and the place we need to enhance wi-fi protection. As soon as it’s linked to {the electrical} outlet and now we have waited a minute till it begins, now we have to attach by way of cable or by way of Wi-Fi to the repeater.

  • If we join by way of cable: We must use an Ethernet community cable and join it from our PC to the WiFi repeater. We will use the community cable included within the repeater field.
  • If we join by way of Wi-Fi: we must find the Wi-Fi community known as FRITZ!Repeater 1200 AX, we additionally must enter the WPA2 password that now we have on the again of the WiFi repeater. When you’ve got not written down this password beforehand, you’ll have to take away it from {the electrical} outlet, write down the password or take a photograph of it, and once more plug it into the socket and wait a minute till the Wi-Fi community seems.

No matter what type of connection you made, the repeater will give you an IP deal with throughout the vary, with the IP deal with being for the repeater, so that you’ll have to enter this non-public IP deal with into your internet browser:

By coming into this non-public IP deal with, the online configuration wizard will seem. Within the first menu now we have to decide on our language, then we choose the area and the WiFi repeater will restart utterly routinely. When it comes again from the reboot, we are going to join once more by way of Wi-Fi if in case you have chosen to attach this fashion, if in case you have linked by way of cable merely refresh the online web page of the browser. Upon getting back from this restart, we must enter a repeater administration password, this would be the key with which you’ll entry its administration by way of the online.

See also  Why in summer time your router will work worse

After coming into the entry password, one other configuration wizard will load us, on this case to configure this Wi-Fi repeater. We should do not forget that this mannequin permits us two clearly totally different configuration modes:

  • Wi-Fi bridge mode: On this configuration mode the FRITZ!Repeater 1200 AX will act as a common Wi-Fi repeater. Which means the repeater will join by way of WiFi to the principle router, after which it would repeat this wi-fi sign with simultaneous twin band to supply us with WiFi protection.
  • LAN bridge mode: On this configuration mode the system will act as a Wi-Fi entry level. Which means the repeater will join by way of Ethernet community cable with its Gigabit Ethernet port to the principle router, after which it would generate a simultaneous dual-band WiFi sign to supply us with WiFi protection.

On this tutorial now we have chosen the WiFi bridge mode, that’s, the common Wi-Fi repeater mode.

The repeater will detect all the encircling Wi-Fi networks, whether or not from the two.4GHz band or the 5GHz band, on this manner, we are able to choose a WiFi community from each bands however belonging to the identical router. You would additionally choose solely the 5Ghz band as a result of it’s quicker and will provide you with higher efficiency, however usually you select each after which outline the working mode within the configuration.

As soon as now we have chosen a frequency band or two, we must enter the WPA2 or WPA3 password of the wi-fi community, as well as, the wizard permits us to “use the identical community key for each wi-fi networks” which might be regular, nevertheless , we may additionally put a special password, as a result of there are routers that permit us to place a key to every frequency band. On this manner, we could have most flexibility.

See also  Uncover the AVM FRITZ!Field 7590 AX router with Wi-Fi 6

As soon as now we have entered the password, we must select which connection possibility we select, this facet is essential to attain the very best efficiency:

  • Use frequency bands flexibly: the repeater will use one frequency band or one other because the trunk community (from the repeater to the router), relying on the space, community visitors and different conditions which will happen. This configuration will probably be accomplished flexibly relying on the present state of affairs. This configuration mode is the default and advisable by AVM.
  • Use Crossband Repeating: this configuration mode permits us to “cross” the interconnection bands. Site visitors from a Wi-Fi consumer connecting to the two.4GHz band on the repeater, trunk visitors (from the repeater to the router) will go over the 5GHz band, with a view to present one of the best efficiency and lowest latency doable . The visitors of a WiFi consumer that connects to the 5GHz band within the repeater, the trunk visitors will undergo the two.4GHz band. On sure events this configuration mode will provide you with further pace, though it depends upon the situation the place you end up, so you must strive it.
  • preserve the frequency band: This mode means that you can set a trunk frequency band if in case you have chosen two bands to connect with the router. Logically, if in case you have used just one, the trunk community will at all times go for the chosen band.

As soon as now we have configured the connection mode, we are going to get a small abstract of all of the configurations made with the chosen SSID and password. Lastly, it would inform us that the FRITZ!Repeater has been configured appropriately and that we connect with the brand new SSID that now we have configured. As soon as we connect with the brand new community, then we can entry this configuration menu once more by way of the online. On this final configuration menu it additionally tells us that we are able to activate the Mesh community so long as now we have a FRITZ!Field router with FRITZ!OS 7 or larger.

See also  configure the FRITZ!Repeater 1200 AX with Mesh WiFi

The router now we have used is the FRITZ! Field 4060, however now we have not enabled the Mesh WiFi, it’s as if it had been an operator router or one other model. As may be seen, the system will seem with its IP deal with, and if we enter the configuration menu we are able to see the Wi-Fi synchronization pace that now we have out there, in addition to the wi-fi and wired shoppers which have linked to the system .

Increasing the Wi-Fi community of any router with this new FRITZ!Repeater 1200 AX is basically easy, as well as, we should bear in mind its wi-fi specs: simultaneous dual-band Wi-Fi 6 class AX3000 (as much as 574Mbps in 2.4GHz and as much as 2,402Mbps in 5GHz with 160MHz channel width). Which means it is going to be capable of present us with excessive wi-fi pace, excellent for streaming video in 4K or no matter we wish.

The value of this tools is round 90 euros roughly, a extremely aggressive worth if we bear in mind the technical specs and in addition the true efficiency that it has achieved within the efficiency assessments.