Configure the ASUS RT-AX89X with an built-in SFP ONT for fiber optics

ASUS router configuration for our operator The very first thing we should do to configure

ASUS router configuration for our operator

The very first thing we should do to configure this router with the GPON SFP is to configure it with the necessities of the fiber optic Web operator that you’ve. If our operator makes use of DHCP to acquire public IP and makes use of a particular VLAN ID, we should configure it as we now have all the time executed, on this half nothing has modified. We are able to do that ISP configuration immediately within the configuration wizard by way of the net, or carry out the configuration by way of the Asuswrt firmware graphical person interface. In our case, we now have executed it immediately within the firmware, with out utilizing the configuration wizard.

Within the instance which you can see under, we now have used a fiber optic connection from Pepephone (Grupo Masmóvil), as well as, at present this fiber is oblique from Orange as a result of there isn’t any direct protection at our house, nevertheless, the configuration could be precisely the identical for all Masmóvil purchasers by way of Asuswrt router configuration.

Within the case of Pepephone, the configuration information that we should apply are:

  • Automated IP handle (DHCP).
  • VLAN ID 20.

Within the following gallery, you may see how we now have configured the Web WAN, we now have to set the automated IP handle and depart the remainder of the configuration choices by default, we wouldn’t have to the touch any further configuration. Within the “Twin WAN” part we now have to be sure that the first WAN is the 10G SFP+, as a result of we’re going to use a GPON ONT by way of SFP within the router.

Concerning the LAN, we should be sure that we now have the default parameters, that’s, the everyday IP to entry the router and that the native community subnet is Lastly, within the “LAN / IPTV” part we should choose “Guide adjustment” and proceed to place the VLAN ID 20 within the corresponding field.

See also  Flip Home windows Defender on or off in Home windows 11

Now that we now have accurately configured the router to acquire a public IP handle, or an IP inside the CGNAT, we’re going to configure the ONT SFP accurately with the operator information.

GPON SFP configuration for the router

The ASUS RT-AX89X router comes ready with a firmware that permits us to entry the ONT SFP from the LAN, no matter whether or not the port is in LAN mode or WAN mode. Due to this specifically designed firmware, we will entry to see the standing of the GPON negotiation.

The very first thing we should do is enter the handle in our internet browser, it can ask us for a username and password (admin and admin), as soon as we now have executed it, we’ll get the principle menu of the overall standing of the GPON. To correctly configure our Masmóvil connection, we should go to the «Setup / SLID Config«, on this menu we could have a field that permits us to configure PLOAM psw of our connection, we copy on this field in ASCII format and click on on «Apply».

Within the “LOID Config” menu we will need to have all the pieces empty for the Masmóvil connection, right here we wouldn’t have to configure the rest.

As soon as we now have executed it, we are able to click on on “Save config”, after which click on on “Administration” and choose “RESET ONU” in order that the ONT restarts and applies the modifications accurately.

The restart course of lasts about 70 seconds, as soon as it has been restarted, we should enter the GPON ONT by way of Telnet, for this we open a PuTTY session, and enter the username «admin» and the password «admin ». It’s possible that you’ll have to enter the “admin” as much as 3 times, as a result of the console doesn’t work nicely on this GPON ONT.

See also  What to think about when shopping for PLC for fiber optics

As soon as inside, if we need to see the standing of the ONT we should enter the next instructions:

We must always get the next:

A very powerful factor on this menu is the «ONT State: O5 Operation«. This message signifies that we now have efficiently authenticated in opposition to our operator’s OLT and may have the ability to entry the Web with none issues. It’s possible that for Grupo Masmovil purchasers this course of takes slightly longer than regular, be affected person in letting it get hold of a public IP handle, not less than 5 minutes of ready is advisable.

For those who wouldn’t have the “ONT State: O5 Operation” message, it might be as a result of you haven’t entered the “sn” needed for the authentication to achieve success, since you could have solely configured the “password”. If we put “?” within the console and press enter, we are able to see all of the instructions that we’re going to have the ability to execute within the «Hal#» menu.

On this menu, what we should do is enter the next command:

After you have entered the right serial quantity, we wait just a few seconds and we are able to see that we go from an “O2 Standby” state to an “O5 Operation” state. The final word objective of the ONT is to get this newest state of the ONT, which signifies that the authentication has been profitable.

This GPON ONT could be appropriate with all operators because it permits us to configure several types of authentications, nevertheless, you may use some other GPON ONT reminiscent of ZISA model to proceed with the configuration on this router, it doesn’t matter what mannequin or model you employ.

See also  Configure your Reddit account with most safety and keep away from hacks

After it tells us that we now have an O5 OPERATION, we should wait about 2 minutes till the ASUS RT-AX89X router obtains the general public IP handle accurately. Within the following screenshot you may see the IP obtained and the operation is ideal, as if we had an exterior ONT, however what this enables us to do is save having further gear to attach.

As you may see, the operation of the SFP+ port of this router as an Web WAN is ideal, as well as, the firmware is designed to have the ability to entry the IP in case you join a GPON ONT, since most of them use the sort of routing.

This ASUS RT-AX89X router is at a value of round 450 euros, a value that we think about excellent if we take note of the highly effective {hardware} that it incorporates and the flexibility that the completely different ports present us.

We have now solely examined the ZTE zxhn f5716g GPON ONT, nevertheless, we consider that there ought to be no downside in the event you use different manufacturers or fashions which are marketed in Spain.